Carriage house
Full-view glass
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Dallas?
Our Garage Door Installation services in Dallas typically run $700 to $2,200 for a standard single or double door, with most homeowners landing around $1,100 to $1,600 for a mid-range steel door with basic installation. If you’re also replacing the opener at the same time, expect to add $250 to $550. The final number depends on door size, material, insulation level, and whether the old door and hardware need extra work before the new door goes in.
Dallas is a big, sprawling market, and pricing shifts depending on where you live. A homeowner in Preston Hollow or Lakewood may see slightly higher labor rates than someone in Mesquite or Garland, simply because travel time and local overhead vary. That’s why we give a written price before any work starts, so the number you hear on the phone is the number on the invoice.
Garage Door Installation Cost Breakdown (2026)
Here’s what you can expect to pay across the Dallas metro for garage door installation and related work. These are real market ranges we see every week from Oak Cliff to Richardson.
| Service | Typical Dallas Price Range |
|---|---|
| New Garage Door Installation (single) | $700 – $1,300 |
| New Garage Door Installation (double) | $1,100 – $2,200 |
| Opener Installation | $250 – $550 |
| Garage Door Spring Repair | $180 – $340 |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| Garage Door Repair (general) | $150 – $600 |
The biggest single driver of your total is the door itself. A basic non-insulated steel door or Single Car Door starts around $400 to $600 for the panel and hardware. A mid-grade insulated steel door, which does a better job keeping a Dallas summer out of the garage, typically runs $800 to $1,400. If you want a carriage-house style door with decorative hardware, a wood-composite overlay, or a custom color, you’re looking at $1,500 to $2,200 and up.
Labor in Dallas for a standard install, where the old door comes down and the new one goes up on existing tracks, usually runs $300 to $500. It’s when the old hardware needs work that the price climbs. Rotted wood around the opening, bent tracks, or an opener that needs to be repositioned all add time and materials. If you want a better feel for what a full installation entails, our Garage Door Installation in Dallas page covers the process step by step.
What Affects Garage Door Installation Pricing in Dallas
- Door size and weight. A single-car door is usually 8×7 or 9×7. A double door is 16×7 or 18×7. Double doors need a stronger torsion spring and more reinforcement struts, which adds $200 to $400 to the hardware cost alone.
- Insulation level. An R-6 insulated door costs about $250 to $500 more than a non-insulated one. In Dallas, where garage temperatures push past 110 degrees in July and August, insulation pays for itself in comfort if you use the garage as a workshop, gym, or extra living space.
- Material and style. Steel is the most common and the most affordable. Aluminum with glass panels runs higher, and real wood or wood-composite doors are premium. Wood also needs more maintenance in Dallas humidity and heat.
- Old door removal and disposal. Most Dallas companies, including us, include removal and haul-away in the install price. If the old door is an antique or unusually heavy, expect a small add-on for the extra labor.
- Track and opener condition. If the existing tracks are bent or the opener is incompatible with the new door, you’ll need additional parts and labor. Replacing tracks adds $120 to $240. Replacing the opener at the same time adds $250 to $550.
- Neighborhood and travel time. Labor rates in the northern suburbs like Frisco and Plano can run slightly higher than in central Dallas or southern suburbs. It’s a small difference, usually $50 to $100, but it’s real.
New Door vs. Repair: Which Makes More Sense?
If your current door is less than 10 years old and the problem is a broken spring, a snapped cable, or a failed opener, repair usually makes sense. A spring replacement in Dallas runs $180 to $340, and most springs last 10,000 cycles, which is about 7 to 10 years for the average household. A cable repair runs $130 to $250. That’s a fraction of replacement cost, and it gets the door working again the same day. You can read more about our approach on the home page.
But if the door itself is dented, rusted through, or sagging, or if you’re tired of looking at a door that dates back to the original build, replacement is the better call. A new door gives you better insulation, quieter operation, and a cleaner look without the piecemeal expense of panel-by-panel fixes. Panel replacement alone runs $250 to $500 per panel, and if you need three or four panels, you’re already halfway to a new door.
Marcus Ellery, owner at Bramwell Garage Doors Dallas, puts it this way: “I tell homeowners to ask two questions. How old is the door, and what does the repair buy you? If the answer is under ten years old and the repair gives you another five to seven years, fix it. If the door is older than that or the damage is structural, replace it. Spending $1,200 on a door you’ll keep for 15 years beats spending $800 patching one that’s already failing.”
How Long Does Installation Take?
A standard garage door installation in Dallas takes 3 to 5 hours from start to finish. That includes removing the old door, inspecting the tracks and opener, mounting the new door, installing the torsion spring, balancing the door, and testing the full cycle.
Here’s the step-by-step sequence we follow on every install:
- Arrival and walkthrough. The technician arrives in the stated window, introduces himself, and walks the job with you. You confirm the door, the hardware, and the written price before anything is unloaded from the truck.
- Old door removal. The old door comes off first. Panels are removed section by section, and the old torsion spring is unwound carefully. Torsion springs hold significant tension, so this is a step for a trained professional, not a weekend project.
- Track and hardware inspection. We check the existing tracks, rollers, hinges, and opener for compatibility. Anything that won’t work with the new door gets called out and priced before we proceed.
- New door assembly. The new panels go up, the hinges and rollers go on, and the door is mounted to the tracks.
- Torsion spring installation and balancing. The new spring is wound to the exact torque the door needs. This is where experience matters. A door that’s off by a half-turn will bind, slam, or wear out the opener motor.
- Opener connection and testing. If a new opener is part of the job, it gets mounted, programmed, and paired with the remotes and keypad. We run the door through 5 to 6 full open-close cycles and make safety adjustments.
- Cleanup and walkthrough. The job site is left clean, the old door and packaging are hauled away, and the technician walks you through what was installed, how to maintain it, and exactly what the written guarantee covers.
That last step is part of what we call the Kingswell Way: say the price before the work, show up in the window, leave the place cleaner than we found it, put the guarantee in writing, and come back if anything fails. Every Bramwell location operates to those same four standards.
What the Kingswell Guarantee Covers on a New Door Installation
Every installation from Bramwell Garage Doors Dallas is backed by the 365-Day Done Right Promise. If anything we installed fails inside the first year, we come back and fix it at no charge. That’s not a verbal assurance. It’s written on every job.
Marcus Ellery says it as plainly as it can be said: “If the door we put in doesn’t work right, we fix it. You don’t have to call three times, you don’t have to prove anything, and you don’t pay another dollar. We’ve been operating under the Kingswell standard since 2001, and the guarantee is the reason people call us back.”
The written guarantee covers the springs, hardware, tracks, and the installation labor. The door itself carries the manufacturer’s warranty, which we register on your behalf so the paperwork is in order if you ever need it. We’re authorized to service all major brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so warranty work doesn’t get bounced between vendors.
How to Save on Garage Door Installation
Most people don’t plan for a garage door replacement until the old one breaks. But a few small decisions before you commit can save you real money.
- Buy the door and opener together. If your opener is more than 10 years old, replacing it at the same time saves you the second service call and the second labor charge. You’ll also get a matched system that’s covered under one installation guarantee.
- Choose a standard size. Custom-sized doors cost 20 to 30 percent more. If your opening fits a standard 8×7, 9×7, or 16×7 door, stay with that size.
- Skip the decorative upgrades if you don’t need them. A clean steel door with good insulation looks great from the street and costs $400 to $800 less than a carriage-house style with wood overlay.
- Keep the existing opener if it’s still solid. If your opener is a LiftMaster or Chamberlain unit under eight years old, it’s probably still fine. There’s no reason to replace a working opener just because the door is new.
- Ask about the full, written price up front. The biggest cost surprise in this industry is a door-step price change. Bramwell gives you a written price before any work starts, every time, without exception. Call (361) 240-9428 and we’ll walk you through the options and give you a real number on the phone.
Why Dallas Homeowners Choose Bramwell for Installation
Dallas has no shortage of garage door companies. What separates Bramwell is what happens when something goes wrong. A technician who doesn’t show. A quote that says $900 and an invoice that says $1,500. A spring that fails six weeks after it was “replaced.” Those are the stories we hear from the people who call us second.
The Kingswell Guarantee exists because Marcus Ellery and the team behind Bramwell got tired of those stories. A live person answers the phone 24 hours a day, 7 days a week. The technician who arrives is background-checked and uniformed. The price is given in writing before any work starts. And if the repair or install fails inside the guarantee period, the second visit is free. That’s the standard that’s been in place since 2001.
FAQs – Garage Door Installation Cost
How much does it cost to install a new garage door in Dallas?
A New Door Installation in Dallas typically costs $700 to $2,200, depending on the size, material, and insulation level. A standard single steel door with basic insulation and installation usually lands around $1,100 to $1,400. Call (361) 240-9428 for an exact quote, free estimates included.
Is it cheaper to repair or replace a garage door?
If the repair is a spring ($180 – $340), cable ($130 – $250), or roller replacement ($110 – $220), repairs are almost always cheaper. But if the door panels are damaged and you need three or more replaced ($250 – $500 each), a new door at $700 – $2,200 makes more financial sense. We’ll give you both numbers on the phone and let you decide.
How much does a garage door opener cost installed in Dallas?
Opener installation in Dallas runs $250 to $550, including the unit and labor. A basic chain-drive opener starts around $250. A belt-drive unit, which is quieter and better for attached garages, runs $350 to $550 installed. Call (361) 240-9428 and we’ll quote your exact setup.
Can you install a garage door the same day?
In most cases, yes. If the door is in stock with a Dallas-area distributor, same-day or next-day installation is standard. Custom-sized or custom-finished doors may take 5 to 10 business days. We’ll tell you the timeline before you commit, and we show up in the window we state.
What does a garage door spring replacement cost in Dallas?
A torsion spring replacement in Dallas runs $180 to $340, parts and labor included. Torsion springs hold significant tension and must be handled by a trained technician with the right winding bars. Never attempt this as a DIY repair. Our springs are covered by the 365-Day Done Right Promise if anything fails inside the first year.
Does Bramwell charge for estimates?
No. Estimates are free, and the price we quote is the price you pay. The written price is delivered before any work starts, and the number doesn’t change at the door. To get yours, call (361) 240-9428 anytime. A live person answers around the clock.
Get a Written Price Before You Decide
If you’re thinking about a new garage door in Dallas, the next step is a phone call. We’ll ask a few questions about your current door, the size of the opening, what style and insulation you want, and give you a real, written number before any work starts. No bait pricing, no door-step surprises, no pressure. That’s the way it’s been since 2001, and it’s the way it will be on your job.
Call Bramwell Garage Doors Dallas at (361) 240-9428 for your free estimate. A live person answers 24/7, and we’ll schedule you for a window that we actually keep.
Written by Marcus Ellery, Owner at Bramwell Garage Doors Dallas, serving Dallas and the surrounding metro since 2001.
Pricing reflects the Dallas market as of 2026. Bramwell Garage Doors Dallas offers free estimates, call (361) 240-9428.
What Our Customers Say
"Door started reversing every time it hit the floor. Turned out to be the sensors out of line. Quick fix, and they didn't charge me an arm and a leg for something simple. Wrote up the warranty right there."
- Greg Halloran"Keypad on the outside stopped working and I was climbing through the house to let the kids in. He reprogrammed it and replaced the worn remote, all in one short visit. Didn't try to sell me a new opener."
- Randy Koslowski"Spring snapped on a Sunday and the door was stuck half open with my car trapped inside. Called Bramwell and they had someone out that afternoon. Price he quoted on the phone was the price I paid, no games. Door runs quieter now than it has in years."
- Mike R.