Carriage house
Full-view glass
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateTrusted Garage Door Spring Repair for Dallas Homeowners
A garage door spring that snaps sounds like a gunshot in the driveway. It also means your door isn’t going anywhere until the spring gets replaced. We’re the Dallas garage door company that shows up when we say we will, hands you a written price before touching a wrench, and backs the Garage Door Spring Repair in Dallas for a full year. Since 2001, Bramwell Garage Door Repair has worked to the Kingswell standard: a real arrival window, a clean job site, a written guarantee. And when you call (361) 240-9428, a live person answers. Not a recording. We handle hundreds of Dallas-area spring failures each year, and a torsion spring replacement for most single-car doors runs $180 – $340, parts and labor included.
Garage Door Spring Replacement
Garage Door Spring Replacement is the process of removing a worn or broken spring and installing a new one with the correct wire gauge, inside diameter, and cycle rating for your door’s weight and use. You need it when a spring snaps, rusts through, or loses tension to the point that the door won’t lift or falls hard when closing. Bramwell Garage Doors Dallas sends a background-checked, uniformed technician who measures your door, confirms the spring specs, and quotes the replacement in writing before any work begins. Most replacements in Dallas run $180 – $340 depending on spring type and door weight.
The Kingswell Way On Every Job
Every spring replacement follows the same four standards: written price first, a real arrival window, a clean job site, and a written guarantee. That’s not a slogan. It’s the same standard we’ve held since 2001, and each independently owned location agrees to it in advance.
Why Spring Pair Replacement Makes Sense
When one spring on a two-spring door fails, the other is usually near the end of its cycle life. We typically recommend replacing both springs at the same time so the door stays balanced and you’re not paying for a second service call in six months. The second spring adds to the total but not to the labor you’d pay later.
Styles & brands we work with
Garage Door Torsion Spring Replacement
Garage Door Torsion Spring Replacement is when we swap out the heavy coil mounted on a metal shaft above the door opening. That torsion spring does most of the lifting work, and when it breaks, the opener motor is suddenly trying to move a door that weighs 150 to 300 pounds on its own. Bramwell Garage Doors Dallas carries a range of torsion springs on every truck, and most Dallas homes we service get a replacement within the $180 – $340 range during a single appointment. We identify the spring’s wire size, length, and winding direction before we ever quote the job.
A Brief Warning About DIY Repairs
Clicking through a video tutorial and then winding a torsion spring by hand is dangerous. Those springs are under enormous tension, and a slip can cause serious injury. We handle hundreds of these in Dallas every year and still treat every single one with respect. Call a trained technician.
What We Look For During Replacement
Before installing, we inspect the shaft, the cable drums, and the bearing plates. Why? Because a broken torsion spring often takes a cable or a bracket with it, and replacing the spring alone just sets up the next failure. We’ll tell you what we see and what it costs before we fix it.
Broken Garage Door Spring
A Broken Garage Door Spring is the most common reason a garage door won’t open, and it’s unmistakable when it happens. You’ll hear a loud bang, then the door will either stay shut or lift a few inches before jamming. The spring has snapped, and the door is now dead weight. Bramwell Garage Doors Dallas repairs broken springs across Dallas, Garage Door Spring Repair in Mesquite, Rowlett, and the surrounding suburbs, usually the same day you call. Expect $180 – $340 for a standard spring replacement, with the exact price written down before we start.
What Happens To Your Opener After A Break
If you or someone in your household keeps pressing the opener button after a spring snaps, the opener rail and gear can take damage they were never built for. The opener is designed to pull a balanced door, not dead-lift it. When we replace the spring, we’ll also run the door manually and listen to the opener to make sure it didn’t get hurt in the process.
Why We Work Fast
A broken spring leaves your garage and often your house exposed. Not to mention your car is stuck inside. We prioritize spring failures because we know what it’s like to stand in a driveway at 7 a.m. with a door that won’t move. Call (361) 240-9428 and we’ll set a real arrival window, not “sometime this afternoon.”
Garage Door Extension Spring
A Garage Door Extension Spring is the long, thin spring that runs along the horizontal track on each side of an older door. It stretches and contracts to help lift the door, which makes it different from the torsion spring mounted above. Extension springs are more common on older Dallas homes and on lighter, single-car doors. Bramwell Garage Doors Dallas replaces and balances extension springs as part of its spring repair service, with the same $180 – $340 range applying to most jobs. If you’ve got a spring that’s stretched, rusted, or snapped along the track, it’s time to replace it.
Safety Cables Are Part of Professional Installation
Extension springs should always have a safety cable running through the middle. Why? Because when an extension spring snaps, it can fly across the garage. That cable keeps the broken spring from becoming a projectile. Every extension spring we install in Dallas gets a safety cable as standard, not as an add-on.
Extension vs Torsion: What We Recommend
Some homeowners ask us whether they should convert from extension springs to a torsion system. For most Dallas homes, a torsion spring setup is quieter and lasts longer, but the change isn’t free, and sometimes the existing door hardware makes the swap more involved than it’s worth. We’ll give you the honest comparison and the written price either way.
Garage Door Spring Installation
Garage Door Spring Installation is what we do when you’re building a new garage, replacing an old door, or converting an extension-spring system to torsion. It’s also the right call when a previous repair left you with a spring that’s the wrong size for the door’s weight. Bramwell Garage Doors Dallas installs springs on new doors, retrofit jobs, and full door replacement projects throughout Dallas, Plano, our Garage Door Spring Repair in Hutchins, and the nearby suburbs. A spring installation as part of a repair falls in the $180 – $340 range, while new-door projects are quoted as part of the full job.
Correct Sizing Comes First
A spring that’s too weak will struggle to lift the door and wear out fast. One that’s too strong will slam the door down and overwork the opener. We calculate the door’s weight, height, and track radius, then select the spring with the right inch-pounds of torque and the right cycle rating. Guessing is not part of the job.
Cycle Ratings Explained
Every spring we install has a cycle rating, usually 10,000, 20,000, or 30,000 cycles. One cycle equals one open and one close. So a 10,000-cycle spring on a door opened three times a day lasts roughly nine years. If you use your garage as a front door, like many Dallas families do, a higher cycle rating makes sense. We’ll show you the options with prices in writing.
Garage Door Spring Adjustment
A Garage Door Spring Adjustment is the service we perform when a door isn’t broken but is off balance: it sags on one side, closes too fast, or feels heavy to lift by hand. You need an adjustment when the spring loses tension over time or after a new opener changes the door’s balance point. Bramwell Garage Doors Dallas offers spring adjustments as part of its standard garage door repair service, typically landing in the $120 – $240 range depending on what the technician has to correct. It’s a fast fix when caught early.
How We Test the Balance
After adjusting a spring, we disconnect the opener and lift the door manually to the halfway point. If it stays put, the spring tension is correct. If it drops, we’re not done. This is the same test any good Dallas garage door tech should run, and it takes about thirty seconds. We don’t skip it.
Warning Signs That Precede a Full Break
A door that’s slowly getting harder to lift or one that creaks when opening is often a spring that’s losing tension. A quick adjustment can buy you months of smooth operation and, in some cases, prevent a full break. If you’ve noticed the change in how your door feels, call us for an adjustment before the spring gives out completely.
Brands We Service
We work on Clopay doors regularly across Dallas, especially in areas like Oak Lawn and Garage Door Spring Repair - Duncanville where their carriage-house styles are common. Clopay doors run heavy in some models, which means the spring has to be sized exactly right, not “close enough.” Our technicians adjust for each model’s actual weight, not the brochure spec.
Wayne Dalton doors have their own torque-master spring system on several models, which sits inside a tube rather than out in the open. It’s a different animal than a standard torsion spring, and we’ve got the right winding tools and familiarity to work on them. We also service Amarr and Craftsman openers and doors, and whether you have one of these makes or something else, we can get it running properly.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- You heard a loud bang from the garage. That sound is almost always a spring snapping. The door may still open a little, but the spring is done. Continuing to use the opener can damage the motor or rail.
- The door lifts a few inches and stops. If the door jerks upward and then hangs, the spring has likely lost its ability to counterbalance the weight. The opener is fighting the full load, which it wasn’t designed to do for long.
- The door feels heavy when you open it by hand. A properly balanced door should lift easily to waist height. If it takes real effort, the spring is failing. This is your early warning, and it’s the cheapest time to act.
- The door slams down when closing. A healthy spring controls the door’s descent. If it falls fast, the spring is weak or broken. That’s a safety risk for anyone standing underneath.
- You can see a gap in the spring coil. If you look up and see a clean separation in the coil, that’s the break. There’s no tension left. Don’t try to splice or jury-rig it. Call for replacement.
Our Process, Step by Step
When you call Bramwell Garage Doors Dallas, here’s what happens from the moment we pick up:
- 1
You call, a person answers. We take your address, ask what you’re seeing, and set a real arrival window. Not a four-hour range. We tell you when we’ll be there, and then we show up then.
- 2
The technician arrives in uniform and gets oriented. They’ll ask to see the door, watch it try one cycle if it moves at all, and inspect the spring system. We check the springs, cables, drums, and the balance of the door.
- 3
You get a written price. Before any work starts, the technician hands you a written quote for the repair. That’s the price you pay. If we find something else during the repair, we stop, show you, and price it before continuing. The number doesn’t change at the end.
- 4
The repair happens, and then the test. We replace or adjust the spring, then run the door through several full cycles. We check the balance by hand, listen to the opener, and make sure the door opens and closes smoothly. Then we lubricate the moving parts, because that’s part of doing the job right.
- 5
You get the guarantee in writing. Every spring repair is covered by the 365-Day Done Right Promise. If the covered repair fails within a year, we come back and fix it at no charge. That promise is in writing, on your invoice.
How Much Does Garage Door Spring Repair Cost in Dallas?
A typical torsion spring replacement in Dallas runs $180 – $340 for a single door, including parts and labor. Twin-spring systems cost more because both springs should be replaced at once, but the total usually stays within that range on a standard residential door. Extension spring jobs land in the same span. The main factors that move the price are the spring’s wire gauge and cycle rating, the door’s weight, and whether the spring sits inside a tube system like Wayne Dalton’s torque-master. An opener repair, if the broken spring damaged the opener, runs $120 – $320 separately.
What affects the price? The biggest variable is the spring’s cycle rating. A 30,000-cycle spring costs more than a 10,000-cycle one, but it means you likely won’t replace it again for close to a decade of daily use. Door height and weight also matter. A heavy, double-wide Clopay or Wayne Dalton door needs a more substantial spring, and that moves the number. So does the condition of the surrounding hardware: if the cable drums are chewed up or the shaft has shifted, that work adds to the bill.
How do you avoid overpaying? Get the written quote before the work starts, and make sure it includes parts, labor, and the specific spring type. That’s how we handle every single job. We’ll also tell you if a more affordable spring makes sense for your situation. And if the number the technician shows you isn’t the number on the final invoice, that’s a problem. Ours matches. Every time. A free estimate from Bramwell Garage Doors Dallas includes the diagnosis, the spring specs we’re recommending, and the full price, all in writing before you say yes.
Our Service Area Near Dallas
Bramwell Garage Doors Dallas serves homeowners across the Dallas metro, from Dallas proper outward. We work in Plano, Carrollton, Mesquite, Rowlett, DeSoto, Sachse, Duncanville, Glenn Heights, Murphy, Oak Lawn, and Hutchins. Most spring repair calls in Dallas itself are handled same day. Calls from the northern suburbs usually get a next-day or same-day window depending on the time of day. When you call, we tell you exactly when we’ll be there. If you need spring work done and you’re outside these areas, call anyway. We’ll tell you honestly if we can reach you.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Garage Door Spring Repair in Dallas
Garage door spring repair is the process of diagnosing, adjusting, or replacing the springs that counterbalance your garage door’s weight. The springs do the heavy lifting, not the opener, and when they fail the door won’t move properly. In Dallas, a spring repair typically costs $180 – $340 and is usually completed the same day you call.
Most spring replacements take between 45 and 90 minutes from start to finish. We bring the springs and tools we need on the truck, so there’s no second visit for parts in most cases. You’ll have your garage back the same day.
Expect $180 – $340 for a standard spring replacement on a single residential door, parts and labor included. The bigger or heavier your door, or the higher the cycle rating on the spring, the more the job can cost. We quote the full price in writing before we begin, and the final invoice matches it. Call (361) 240-9428 for an exact quote.
Yes. We service and repair openers and doors from LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Our trucks are stocked with parts for the most common models in Dallas, which keeps your repair from turning into a two-visit job.
In most cases, yes. When you call us, a live person answers 24/7, and we’ll give you a real arrival window, often the same day. Spring failures move up our schedule because a stuck garage door can mean missed work and an unsecured house. We’ll tell you the soonest window we have and then hit it.
Every spring repair carries the 365-Day Done Right Promise. If the covered repair fails within a year, Bramwell returns and fixes it at no charge. That promise is in writing on every invoice. You also get a written guarantee that spells out exactly what’s covered and for how long.
Not much. Clear the area around the door so we can work, and if you can, leave the door closed or let us know it’s stuck open. We’ll handle everything else, including the cleanup. You’ll get a written price before we touch anything, so you can make the decision with the number in front of you.
Schedule Your Garage Door Spring Repair Service in Dallas Today
If your garage door spring has broken or is on its way out, call Bramwell Garage Doors Dallas at (361) 240-9428. We’ll set a real arrival window, send a background-checked technician, and put the full price in writing before the work begins. You’ll also get our written 365-Day Done Right Promise, so if the repair fails in the first year, we come back and fix it. It’s the same standard we’ve held since 2001, and it’s the reason homeowners across Dallas keep our number handy. Call now for a free estimate.
Written by Marcus Ellery, Owner at Bramwell Garage Doors Dallas, serving Dallas and nearby suburbs since 2001.