Carriage house
Full-view glass
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterSpring Repair in Dallas, TX
Garage door spring repair in Dallas typically costs between $150 and $280 for a standard torsion spring replacement, parts and labor included. Most spring failures are diagnosed and repaired the same day, and at Bramwell Garage Doors Dallas, you’ll get a written price before any work starts. If your door feels suddenly heavy or makes a loud bang and won’t lift, the spring has likely failed, and the repair is usually urgent.
Springs handle nearly all the lifting weight of your garage door. When one breaks, the opener strains against hundreds of pounds it was never designed to carry alone. That’s the moment to call a professional rather than trying to force the door up manually. Our Garage Door Repair team has worked on Dallas garage doors under the Kingswell standard since 2001, and spring replacement is the most common emergency call we get. If you’re dealing with a broken spring right now, call (361) 240-9428 and a live person will answer, day or night.
We serve the whole Dallas area, from Lakewood and East Dallas out to Richardson, Garland, and Mesquite. If you live in a neighborhood with older homes, you should know that springs in doors built before roughly 2005 are often close to the end of their service life. Dallas heat can also shorten spring life, something we’ll explain more below.
When You Need Spring Repair
The symptoms of a failing or broken spring are usually obvious once you know what to look for. Here are the most common ones we see in Dallas homes:
- The door won’t open, and you heard a loud bang from the garage. That sound is the torsion spring snapping under tension. The door will feel dead on the track, and the opener will strain or refuse to lift it.
- The door feels suddenly heavy when you pull the red emergency release cord. A healthy door should feel manageable to lift by hand. If it takes real effort, the spring isn’t doing its share of the work.
- The door opens a few inches, then stops. This happens when one of two springs has broken. The remaining spring can’t counterbalance the full door weight, and the opener safety sensors may reverse it.
- You can see a visible gap in the torsion spring above the door. Look at the metal coil mounted horizontally above the closed door. If you see a two- or three-inch gap in the coil, that spring has snapped clean through.
- The opener is straining, grinding, or sounding louder than it used to. Openers are not designed to lift the full door weight. A worn spring forces the motor to work harder, which shortens opener life and often leads to a broken gear.
- The door is crooked when opening or closing. A broken spring on one side causes uneven lifting. If the door tilts or binds partway up, stop using it and call for spring repair.
One note: if the door is stuck halfway up or won’t stay open, do not park a car in the garage until the spring is replaced. A door that drops unexpectedly can damage the vehicle or injure someone standing beneath it.
Our Spring Repair Process
Spring repair is precision work. Here is how we handle every job at Bramwell Garage Doors Dallas, step by step:
- We answer the phone and schedule a real arrival window. You’ll speak to a live person, not a voicemail tree. We tell you when the technician will arrive, and we show up inside that window.
- The technician inspects the full door system. Before touching anything, we check both springs, the cables, the rollers, the hinges, and the opener. A broken spring often points to another worn component, and we want you to see the full picture.
- You get a written price before any work starts. The number on the quote is the number on the invoice. If additional work is recommended, we explain it, show you the worn part, and give you a new written price before proceeding.
- We replace the spring or springs with a matched pair. If one torsion spring has broken, the other is almost certainly near failure. Replacing both at the same time resets the door’s balance and prevents a second service call in six months.
- We lubricate, balance, and test the door under load. After installation, we cycle the door several times, adjust the tension, and test the opener’s force settings. The door should open smoothly, close evenly, and hold position when stopped halfway.
- We leave the job site clean and put the guarantee in writing. You’ll get a written copy of the guarantee before we leave. Every spring repair is covered by the 365-Day Done Right Promise: if it fails within a year, we come back and fix it at no charge.
Spring Repair Pricing in Dallas
Here’s how much garage door repair costs for spring work in Dallas. These are honest ranges for the work, not teaser prices that balloon once the technician arrives:
| Service | Typical Dallas Price Range |
|---|---|
| Single torsion spring replacement | $150 – $280 |
| Dual torsion spring replacement (both springs) | $280 – $450 |
| Extension spring replacement (older doors) | $120 – $220 |
| Spring replacement plus cable replacement | $250 – $400 |
| Spring replacement plus opener force adjustment | Usually included at no extra charge |
Several factors affect the final price. The cycle-life rating of the spring matters more than most people realize: a 25,000-cycle spring costs more than a 10,000-cycle spring, but it can last three to four times longer. In Dallas, where the average door cycles three to five times per day, that difference shows up within a few years.
Door weight is another variable. A double-wide door on a two-car garage needs heavier-duty springs than a single-car door. Older wooden doors from the 1980s and 1990s are far heavier than modern steel doors, which means more expensive springs and more labor to balance the door correctly.
The spring’s wire gauge and inside diameter must match the door’s weight and height precisely. We carry the common gauges and sizes in our truck stock, which is why most spring repairs in Dallas are completed in a single visit. If a door has a non-standard size, we’ll source the correct spring and give you a clear timeline.
Every spring repair at Bramwell includes the 365-Day Done Right Promise. If the repair fails within the guarantee period, we return and correct it at no charge. That commitment is in writing on every job, and it’s the core of the Kingswell Guarantee. Call (361) 240-9428 for a free estimate, and we’ll give you a firm price on the phone before we even send a truck.
Why Dallas Homeowners Call Bramwell Garage Doors Dallas
Marcus Ellery runs Bramwell Garage Doors Dallas under the full Kingswell standard. The Kingswell family company has operated since 2001, and each location is independently owned and operated while working to the same four commitments: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on every repair.
Every technician who arrives at a Dallas home is background-checked and in uniform. You’ll know exactly who is pulling into the driveway. The price you’re quoted before the work is the price you pay when the work is done. And the 365-Day Done Right Promise means that a spring repair that fails within a year is corrected at no charge, on our time and our dime.
We service all major garage door brands, including Clopay and Amarr doors that are common in Dallas suburbs, plus Wayne Dalton and Craftsman systems found in many older Dallas homes. Whether your door came with the house or you picked it out yourself, the spring replacement follows the same standard: correct spring rate, correct torque, correct balance.
FAQs – Spring Repair
How much does garage door spring repair cost in Dallas?
Most torsion spring replacements in Dallas run $150 to $280 for a single spring, parts and labor included. Replacing both springs typically costs $280 to $450. The exact price depends on door weight, spring cycle rating, and whether cable repair or other parts need attention. Call (361) 240-9428 for an exact quote, and you’ll get a written price before any work begins.
Can you fix a broken garage door spring the same day?
Yes. Most spring repairs in Dallas are completed in one visit. Our technicians carry the common spring sizes, gauges, and winding bars in the truck. When you call, we’ll schedule a real arrival window, and the technician will diagnose the spring, show you the failed part, and complete the replacement on site. A live person answers the phone 24/7, so you can call at 7 a.m. or 11 p.m. and get a same-day appointment.
Is it cheaper to repair or replace a garage door spring?
Spring repair is almost always the more affordable option. A full door replacement in Dallas costs $1,200 to $3,500 on average, while a spring replacement is $150 to $450. If the door panels, tracks, and opener are in good shape, spring replacement restores full function for a fraction of the replacement cost. We’ll always tell you honestly if a door has structural damage that makes replacement the better long-term choice.
How long do garage door springs last in Dallas?
A standard 10,000-cycle spring lasts about 7 to 9 years in a Dallas home that cycles the door three to four times a day. Upgraded 25,000-cycle springs can last 15 to 20 years. Dallas heat accelerates metal fatigue in garage door springs, so homeowners in full-sun garages often see shorter spring life than the national average. If your springs are over ten years old, you’re likely on borrowed time.
Why do I need to replace both springs if only one broke?
The second spring has cycled the same number of times as the failed one and is near the end of its life. Replacing only the broken spring leaves the older, worn spring in place, which means another service call and another labor charge when it fails. Replacing both springs at once resets the door’s balance, costs less per spring, and gives you a matching pair with an identical cycle-life rating.
Can I use my garage door opener with a broken spring?
No. Running the opener with a broken spring forces the motor to lift the full door weight alone. This strains the opener gear, causes cables to jump off the drums, and can require track realignment or worse. Stop using the opener immediately, leave the door closed if possible, and call for spring repair before trying to operate the door again.
Call Bramwell Garage Doors Dallas for Spring Repair
A broken spring is not a repair to postpone. The door can’t lift safely without it, and any attempt to force it risks damage to the opener, the cables, or the panels. Call Marcus Ellery and the team at Bramwell Garage Doors Dallas at (361) 240-9428 for a free estimate and same-day spring repair. You’ll get a written price, a real arrival window, and a written guarantee on every repair. A live person answers the phone 24 hours a day, 7 days a week, and we service all major brands, including Clopay, Amarr, Wayne Dalton, and Craftsman. We’re ready when you are.
Written by Marcus Ellery, Owner at Bramwell Garage Doors Dallas, serving Dallas.