Carriage house
Full-view glass
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterPanel Replacement in Dallas, TX
A dented or cracked garage door panel is more than a cosmetic issue. It weakens the door’s structure, lets in Dallas heat and humidity, and can eventually throw the whole door out of balance. Panel replacement in Dallas typically costs $275 – $550 per panel, parts and labor included, and most single-panel jobs are completed in under two hours the same day we arrive.
At Bramwell Garage Doors Dallas, we replace damaged sections on doors from Clopay, Amarr, Wayne Dalton, and Craftsman. If the damage is limited to one or two panels and the rest of the door is in good shape, replacement is almost always the smarter money than a full door swap. Call us at (361) 240-9428 and we’ll give you a straight answer on whether your door can be patched with a new panel or if it’s time for a full replacement. We’re part of the Garage Door Repair in Dallas network serving homeowners across the metro.
Every job runs on the Kingswell Guarantee: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on the repair. If the panel or the work fails within 365 days, we come back and make it right at no charge. That promise is in writing on every invoice, not just said at the door.
When You Need Panel Replacement
Here are the situations where a panel replacement makes sense. If any of these sound familiar, it’s worth a call before the problem spreads and costs you more money.
- Storm or vehicle damage: Dallas hail storms and parking-lot bumps are the two most common causes we see. A dented bottom panel from a car or a cracked section after a hail storm compromises the door’s rigidity.
- A door that’s suddenly unbalanced: When one panel is bent, the door can bind in the tracks. That extra friction wears out rollers and puts strain on the torsion spring, the heavy coil mounted above the door that does most of the lifting.
- Visible cracks or splitting: Wood doors and some older steel doors split along the panel edges. Once moisture gets inside, the panel swells and the problem gets worse with every Dallas rainstorm.
- Hot spots or drafts around the door: A damaged panel breaks the seal, letting conditioned air escape. In a Dallas July, that’s money leaking out of your garage every afternoon.
- You’re selling the house: A banged-up garage door is one of the first things home inspectors flag. Replacing a panel costs a fraction of a new door and removes an objection for buyers.
Our Panel Replacement Process
We follow the same four steps on every panel job, no matter the brand or the damage. It’s how we’ve done it since 2001, and it’s what the Kingswell Guarantee is built on.
- You call, we listen. A live person answers 24 hours a day, 7 days a week, including weekends and holidays. No voicemail tree, no next-business-day callback. Tell us the door brand and what happened, and we’ll schedule a window that works for you.
- We show up in the window we promised. You’ll know who’s pulling into the driveway: every technician is background-checked and arrives in uniform. We inspect the door and give you a written price before any work starts. If the panel can’t be matched or the door’s too far gone, we’ll tell you that honestly and show you the numbers.
- We replace the panel and check the whole door. The actual panel swap usually takes 30 to 60 minutes. But we don’t stop there. We check the spring tension, rollers, hinges, and tracks because a panel that fails often does damage you can’t see from the outside.
- We hand you a written guarantee and leave the job site clean. The 365-Day Done Right Promise covers the panel and the labor. If it fails within a year, we come back and fix it free. That second visit is on us. The Kingswell Way is simple: say the price before the work, show up in the window, leave the place cleaner than we found it, put the guarantee in writing, come back if it fails.
Panel Replacement Pricing in Dallas
Most panel replacements in Dallas run between $275 and $550 per panel. That includes the panel itself, labor, and the written guarantee. Here’s how the price breaks down by door type:
| Door Type | Typical Panel Replacement Cost |
|---|---|
| Standard steel door (single panel) | $275 – $400 |
| Insulated steel or composite | $350 – $500 |
| Wood or carriage-style door | $400 – $650 |
| Custom panel (special match or rare color) | $450 – $750 |
Three things move the number. First, the panel itself. A standard white or almond steel panel is readily available. A custom wood-grain finish or an unusual color takes longer to source and costs more. Second, the condition of the surrounding hardware. If the impact that wrecked the panel also bent a hinge or cracked a roller, those parts-including any needed Roller Replacement-get added to the written quote. Third, how many panels are involved. One panel is a simple swap. Three panels means the door has real structural damage and it’s time to compare against a full door replacement anyway.
We’ll never surprise you with the number. You get a written price before any work starts, and the invoice matches that number exactly. That’s the Kingswell standard and it applies on every job, without exception.
If you’re weighing a panel replacement against a full door replacement, here’s the math we walk through with homeowners every week. A bottom panel on a five-year-old steel door is usually worth replacing. A door that’s 20 years old with a collapsed top section and rust along the rails is a different conversation. We’ll show you both numbers and give you an honest recommendation. Call (361) 240-9428 for a free estimate and we’ll give you a straight answer.
FAQs – Panel Replacement
How much does it cost to replace one garage door panel in Dallas?
A single panel replacement in Dallas typically costs $275 – $400 for a standard steel door, and $400 – $650 for wood or carriage-style doors. The final price depends on the panel type, color match, and whether surrounding hardware needs attention. Call (361) 240-9428 for an exact quote, estimates are free and the price is in writing before any work begins.
Can you match the color of my existing door?
Yes, we match manufacturer colors for Clopay, Amarr, Wayne Dalton, and Craftsman doors. For standard colors like white, almond, and sandstone, the match is straightforward. For custom finishes or older doors where the color has faded from Dallas sun exposure, we’ll show you the closest available options before you commit to anything.
Is it cheaper to replace a panel or the whole door?
If your door is under ten years old and the damage is limited to one or two panels, replacing the panel is almost always cheaper by $500 to $2,000 compared to a full door installation. If the door is older, the spring is worn-sometimes requiring Spring Repair-and multiple panels are compromised, a full replacement often makes more long-term sense. We’ll give you both numbers in writing and let you decide.
Can you come out today for panel replacement?
In most cases, yes. We keep common panel sizes and colors in local stock, and a live person answers the phone 24/7 to get you scheduled. Same-day service depends on panel availability and current technician routing in Dallas, but we will always give you a real arrival window and honor it. Call (361) 240-9428 and we’ll tell you the soonest window we have.
Note on safety: A garage door is under serious tension, and the panels are part of that load-bearing system. We don’t recommend partial DIY fixes on damaged panels because the door can shift unpredictably when sections are removed. That’s work for a trained technician with the right tools, Sensor Calibration knowledge if needed, and a written guarantee behind the labor.
If your garage door panel is cracked, dented, or warped, call Bramwell Garage Doors Dallas at (361) 240-9428 for a free estimate. You’ll get a written price before any work starts, a technician who shows up in the window we promised, and our Garage Door Repair services backed in writing by the 365-Day Done Right Promise.
Written by Marcus Ellery, Owner at Bramwell Garage Doors Dallas, serving Dallas.